Hello!
I have generated a DXF filke with the commands:
Set terminal dxf
Set Output =93file.dxf=94
splot =93textfile.txt=94
So, after I have opened the DXF file in a CAD program, I have seen
that the distance between consecutive tics on the same axis it=92s not
the same as I aspected.
As example, the distance between the second tics and the third tics is
8.516 but the distance between the third tic and the fourth tic is
8.517.
This happens on both the X-axis and Y-Axis.
Every help would be greatly appeciated.
Best Regards
