In article
<7dfdae02-b99a-4e7f-be7b-aa8fb420c068@[EMAIL PROTECTED]
>,
<adron02@[EMAIL PROTECTED]
> wrote:
>My question is somehow related to this post, so I continuing it. I
>have the following type of data:
>
>===========
>#x y 1 2 3 ......
>30.0 0.0 0.00126 0.00022
>30.0 10.0 0.00211 0.00025
>30.0 20.0 0.00228 0.00033
>30.0 30.0 0.00201 0.00040
>30.0 40.0 0.00216 0.00051
>30.0 50.0 0.00249 0.00067
>30.0 60.0 0.00230 0.00112
>30.0 70.0 0.00158 0.00077
>30.0 80.0 0.00141 0.00075
>30.0 90.0 0.00168 0.00085
>30.0 100.0 0.00268 0.00123
>
>35.0 0.0 0.00252 0.00095
>35.0 10.0 0.00494 0.00153
>35.0 20.0 0.00572 0.00157
>35.0 30.0 0.00572 0.00178
>35.0 40.0 0.00435 0.00182
>35.0 50.0 0.00493 0.00206
>35.0 60.0 0.00468 0.00228
>35.0 70.0 0.00335 0.00185
>35.0 80.0 0.00247 0.00132
>35.0 90.0 0.00348 0.00206
>35.0 100.0 0.00563 0.00371
>
>40.0 0.0 0.00552 0.00198
>40.0 10.0 0.00939 0.00297
>40.0 20.0 0.00992 0.00406
>40.0 30.0 0.00849 0.00387
>40.0 40.0 0.00698 0.00379
>40.0 50.0 0.00792 0.00437
>40.0 60.0 0.00714 0.00445
>40.0 70.0 0.00564 0.00366
>40.0 80.0 0.00460 0.00276
>40.0 90.0 0.00612 0.00380
>40.0 100.0 0.00954 0.00587
> =====================
>
>The first 2 columns are x and y, and after that I have a number of
>columns with values normalized to 1. I have already made 3d plots (as
>well as pm2d map plots) of x,y,z, where z is one of the columns
>labaled successively with 1, 2, 3... . However, these plots are
>interdependent and I want to put them together on a single graph. What
>are my options?
Sorry. I don't understand what you mean by "on a single graph".
Could you perhaps provide a URL for a graph that is similar to
what you are trying to achieve?
>I have considered 2 options for now:
>
>1. Use multiplot to stack these plots together using different pallete
>(colors) for every collumn. However, it seems hard to adjust the view
>options. Also, the graph becomes messy when colors are overlapping. Is
>there a way to make colors a bit transparent?
The CVS version of gnuplot sup****ts transparency.
set style fill transparent solid <alpha_value> {{no}border}
>2. Use animated gif to make a figure that samples through all plots
>corresponding to every column. However, first, I am not certain I know
>how exactly to make this, and second, this will not work if we want to
>obtain a static graph intended for a paper.
>
> I also cannot understand this:
>> 2) define a multi-range palette, but use the same palette for the
>> whole set of plots. For example:
>>
>> set palette model RGB defined \
>> (0 "white", 100 "black", 101 "yellow", 200 "red", 201 "green", 299
"blue")
>> test palette
>
>and if it has applicability to my case. I do not know what exactly
>these numbers define, and how exactly this pallette can be used.
>
>I would appreciate any suggestions.
>Thanks.
--
Ethan A Merritt
|
